2012年06月05日
2012年06月05日
Rock River Amrs Lar-8 Elite Operator .308
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
Officers need .308-caliber weapons like the LAR-8 to defeat barriers and go the extra distance. Shown with a Weaver Tactical 1-5×24mm scope in a YHM mount.
The LAR-8 features an ambidextrous magazine release as well as bolt release, located at the bottom rear of the mag well.
BLOG ARCHIVES
Officers need .308-caliber weapons like the LAR-8 to defeat barriers and go the extra distance. Shown with a Weaver Tactical 1-5×24mm scope in a YHM mount.
The LAR-8 features an ambidextrous magazine release as well as bolt release, located at the bottom rear of the mag well.
BLOG ARCHIVES
2012年06月05日
Glock 26 and Long Magazine
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
This is the Glock 26 from Tokyo Marui. We tried to test it with a long magazine to really feel the blowback of this tiny beast.
BLOG ARCHIVES
This is the Glock 26 from Tokyo Marui. We tried to test it with a long magazine to really feel the blowback of this tiny beast.
BLOG ARCHIVES
2012年06月05日
P90 Disassembly
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
The following photos are step by step disassembly of the Tokyo Marui P90. By far this is the easiest AEG to takedown, it only to remove two screws and everything is disassembled, excluding the gearbox of course which involves another part of an AEG disassembly.
The disassemble P90
The P90
Of course, first remove the magazine
Push this button inwards and then slide the front assembly out as shown below
Slide in this direction
Turn the inner barrel assembly clockwise until the small nub fits into the slot...
...this nub, then slide the assembly out.
Now to take the gearbox out, Remove the stock plate by pushing and sliding as shown in the photo above
Now remove these two screws that hold the retaining plate
Slide out the retaining plate
After removing the retaining plate, the gearbox should slide out easily. If there is a little bit of resistance try to wriggle it out gently
And now you have fully disassembly a P90. This should also be the same with all P90 AEGs out there, most of them are vlones of Tokyo Marui.
BLOG ARCHIVES
The following photos are step by step disassembly of the Tokyo Marui P90. By far this is the easiest AEG to takedown, it only to remove two screws and everything is disassembled, excluding the gearbox of course which involves another part of an AEG disassembly.
The disassemble P90
The P90
Of course, first remove the magazine
Push this button inwards and then slide the front assembly out as shown below
Slide in this direction
Turn the inner barrel assembly clockwise until the small nub fits into the slot...
...this nub, then slide the assembly out.
Now to take the gearbox out, Remove the stock plate by pushing and sliding as shown in the photo above
Now remove these two screws that hold the retaining plate
Slide out the retaining plate
After removing the retaining plate, the gearbox should slide out easily. If there is a little bit of resistance try to wriggle it out gently
And now you have fully disassembly a P90. This should also be the same with all P90 AEGs out there, most of them are vlones of Tokyo Marui.
BLOG ARCHIVES
2012年06月05日
McMillan CS5 Stubby 7.62mm
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
Compact backpack sniper system with the ability to hide in seconds!
Even with the suppressor attached, the CS5 “Stubby” is incredibly compact and features a folding stock for urban deployments.
BLOG ARCHIVES