スポンサーサイト


上記の広告は1ヶ月以上記事の更新がないブログに表示されます。
新しい記事を書くことで、こちらの広告の表示を消すことができます。  

Posted by ミリタリーブログ  at 

2011年12月07日

AXTS Lower Receiver

私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。



As a left-handed shooter, the AX556 Lower Receiver from AXTS Weapons is tailor made for me. It's the first fully ambidextrous lower receiver for the AR-15 platform and every function on the lower receiver is now accessible from both sides of the weapon. The added ambi controls have been integrated into the lower with the minimum number of additional parts, while maintaining the standard location and functionality of the legacy controls.

A-DAC Feature Description - The AX556 receiver utilizes the same basic design as the A-DAC-F (Ambidextrous Dual Action Catch, Forged) Lower, and incorporates the mechanism that AXTS refers to as the Dual Action Catch into the receiver. This A-DAC system consists of a custom bolt catch, magazine release button, and the A-DAC pin. The A-DAC pin is the only additional part added (when compared to a standard receiver), and is completely internal to the receiver. The nice thing about having this feature integral to the lower is that there are no add-on external levers needed.

Like the A-DAC-F, the AX556 receiver has a precisely machined hole connecting the magazine release button channel and the bolt catch channel at an angle. The A-DAC pin rides in the hole, and contacts an angled face on the back side of the magazine release button, and a recess in the bottom of the bolt catch. When the magazine release button is depressed, and moves from right to left, it pushes the pin up the angled hole, which pushes on the bottom of the bolt catch rotating it upward. The AXTS website has a series of illustrations which show exactly how this works here on the A-DAC-F. The function is the same on the AX556. The A-DAC pin can easily be removed if desired, and the magazine button will function as 'normal' without lifting up the bolt catch.







NEWS ARCHIVES

  

Posted by echigoyaworks  at 21:40Accessories

2011年12月07日

S&W M&P15 MOE from King Arms

私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。



Fully S&W Licensed Engrave Logos / Laser Markings
S&W M&P15 Receiver (Easy Disassembly)
Bolt Locking & Functional Bolt Catch
Magpul PTS MOE Retractable Stock w/ Rubber Buttpad
Magpul PTS MOE Pistol Grip
Magpul PTS Flip-Up MBUS Rear Sight
Magpul PTS MOE Handguard
Magpul PTS 360 Rounds PMAG (Hi-Capacity)
16inch One-Piece Outer Barrel
High Quality 7mm Bearing Metal Gearbox
Aluminum & High Grade Polymer Made










NEWS ARCHIVES

  

Posted by echigoyaworks  at 19:41Rifles

2011年12月07日

H&K G36CV Electric Blow Back AEG from Umarex

私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。



1/1 Scale High Power Assembled Electric Powered Airsoft AEG
Official H&K (HECKLER & KOCH) Licensed Authentic Marking on Body
Unique Serial Number on Body matching with package box
New Bolt Blow Back System
Charging Handle can be locked & released (open to adjust Hop-Up)
Synthetic Fiber Body
Rapid blowback bolt give a new sense of realism to the G36 airsoft assault rifle with a strong recoil action
Nylon Fiber Made Handguard with metal side & under rail accommodate lot of accessories like Forgrip or Flashlight
Integrated Sight & Top Flat Rail also act as carry handle function
Realistic Gas Block, Piston & Barrel Locking System
One-Piece Outer Barrel
14mm Clockwise Barrel Thread
No Tools required for completed assembly / disassembly
Full Metal Gear & Parts
Semi-Transparent Hi-Capacity Magazine accommodate 470 Round 6mm airsoft plastic pellet
Revolutionary magazine design allow two magazine clip together easily
Nylon Fiber Made Handguard
Package Include One Adjustable Folding Stock With Rubber Stock Pad / Cheek Piece, One Spare Folding Stock and One Foregrip
Fast & easy battery replacement
Front handguard allow installation up to 8.4V 1700mAh Battery (Mini Type, Mini Plug)
Ambidextrous sling mount locations and fire selector lever that is user friendly to both left and right handed










NEWS ARCHIVES

  

Posted by echigoyaworks  at 16:40Rifles

2011年12月07日

Magpul Type Ambidextrous Sling Installation

私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。

This is a DIY on how to install an ambidextrous sling attachment to the Tokyo Marui M4 Recoil Shock Series. I wish I had a guide like this when I did mine, because I ended up scratching the buffer tube, and installing it misaligned.
You will need few basic tools to do this
1. Philips screwdriver
2. Soldering iron (this is important if you want to do it properly)
3. Flat head screwdriver or a knife




First remove the buttstock by sliding it off the buffer tube. Then remove the three screws as shown.


Remove the wire cover and you will see the wires with the connector that contacts with the stock pipe battery plate.



Now using a soldering iron, you have to detach the connector assembly.


Shown here as the wires are disconnected (this is really important to do a good job, otherwise you will have trouble screwing back your buffer tube)


Remove the wire cover here.


Using a stockpipe wrench loosen the buffer tube ring until you can pull the wires off it.


Then do the same thing with the receiver backplate.


Now you are ready to unscrew the buffer tube.


After removing the buffer tube, you are now ready to replace the metal back plate with the ambidextrous sling attachment.


Now reattach the buffer tube slowly making sure that you don’t scratch the finish on the pipe.


Now insert the wires inside the sling attachment and the buffer tube ring.



From here, it’s just a matter of backtracking and putting everything back the way you disassembled you it.
Here’s how it look after attaching the magpul sling.








NEWS ARCHIVES

  

Posted by echigoyaworks  at 12:10DIYs

2011年12月07日

H&K 45

私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。

Another gas gun soon to be released by Tokyo Marui is the HK45



Gun History

Developed from the start to be a defensive handgun, the HK45 Compact will easily fit the requirements for a concealed carry handgun. With an overall length of 7.2 inches, height of 5.06 inches and a width of 1.14 inches, this gun is a true compact but not a sub-compact. Like the USP, the HK45C can be purchased with any of 10 trigger systems, but this gun came with (at my request) the LEM (Law Enforcement Modification) trigger that offers a short length, hammer-fired, double-action-only (DAO) mechanism that’s easy to train with and shoot.

The LEM is my preferred action due to its simplicity and ease of use. Other variants offer decock and safety levers for both right- and left-hand shooters. Since the HK45C comes standard with an enlarged, contoured, ambidextrous magazine release as well as slide lock levers on both sides of the gun, the LEM makes this a true “everyman’s” pistol.





To offer the power of the .45 cartridge in a compact as well as controllable package, HK integrated a very effective recoil reduction system into the pistol’s design. This system can potentially reduce as much as 30 percent of the gun’s felt recoil, an important feature for rapid follow-up shots! While none of us likes to think that we will miss, it can happen, especially during a gunfight. Helping shooters get back on target fast is a desirable feature.

Both the HK45C and its big brother, the HK45 are rated for +P ammo and offer a service life of at least 20,000 rounds. Both pistols also have polygonal rifling in the barrel as well as a rubber O-ring at the muzzle for increased slide-to-barrel lock, which increases accuracy, velocity and service life. For those agencies or individuals that have special needs, a threaded barrel can be added for the addition of a suppressor.







NEWS ARCHIVES

  

Posted by echigoyaworks  at 09:00News