2012年07月17日
Marine Air Wing using Leupold HAMR
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
Apparently the Marine Air Wing, America's Navy's Army's Air Force, are using the new Leupold HAMR scope. Its combination of long eye relief and compact size make it a good choice for ariel overwatch. The Marine Air Wingers also appear to be Magpul fans, using Magpul stocks and magazines.
The Leupold HAMR is said to be part of the SOPMOD Block II kit which is currently under development.
BLOG ARCHIVES
Apparently the Marine Air Wing, America's Navy's Army's Air Force, are using the new Leupold HAMR scope. Its combination of long eye relief and compact size make it a good choice for ariel overwatch. The Marine Air Wingers also appear to be Magpul fans, using Magpul stocks and magazines.
The Leupold HAMR is said to be part of the SOPMOD Block II kit which is currently under development.
BLOG ARCHIVES
Posted by echigoyaworks
at 21:00
2012年07月17日
Wilson Combat SBR Tactical 7.62×40 WT
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
Wilson Combat’s SBR Tactical is extremely powerful yet easy to maneuver with in close quarters. Wilson’s proprietary 7.62×40 WT cartridge has just the right amount of knockdown power to pair with the SBR’s barrel. This is truly a versatile platform. Shown here with an Aimpoint CompM3.
New chamberings come and go all the time, and this has always been the nature of the business. Someone is always trying to improve on existing cartridges, platforms and systems. It is this innovation that makes the firearms industry as strong as it is.
One of the longest standing of these projects has been the short .30 caliber for the AR platform. Since the first time a U.S. soldier fought against the AK-47 and its 7.62×39mm cartridge, the industry has tried to make that round (or one like it) work in an AR. It is a project that continues to this day, resulting in cartridges like the 300 AAC Blackout, .300 Whisper and a few others. They are all an attempt to approximate the ballistics of the 7.62×39mm and function properly in an AR-type rifle. For most, that is as close to 2,400 feet per second (fps) as you can get with a 125-grain bullet. New powders, bullets and precise manufacturing have made this better with each passing year. But getting these cartridges to fire has never really been the issue—it has been getting them to work in magazines.
The Wilson Combat Whisper762 suppressor does little to affect the balance of the SBR Tactical—it’s lightweight, quiet, and reliable. During range tests, the suppressor showed no signs of shifting the point of impact. It provided minimal backpressure, never came loose, and maintained excellent sound suppression.
Take a close look at an AK-47 magazine. It curves almost immediately. Other than the lip of the magazine, about an inch or so, it is one continuous curve. This is necessary for the ammunition to feed properly past about ten rounds, given the cartridge diameter. You could make a straight magazine, of course, but it would be too long to be practical, and still presents its own set of issues. You need the curve in order to make it practical with a 30-round magazine—even for a 20- or 25-rounder. Without this curve, the rounds will bunch up in the middle and cause malfunctions. It is just one of those laws of physics that cannot be circumvented.
Wilson builds their SBR with their TTU (Tactical Trigger Unit), which provides operators with a clean two-stage trigger.
BLOG ARCHIVES
Wilson Combat’s SBR Tactical is extremely powerful yet easy to maneuver with in close quarters. Wilson’s proprietary 7.62×40 WT cartridge has just the right amount of knockdown power to pair with the SBR’s barrel. This is truly a versatile platform. Shown here with an Aimpoint CompM3.
New chamberings come and go all the time, and this has always been the nature of the business. Someone is always trying to improve on existing cartridges, platforms and systems. It is this innovation that makes the firearms industry as strong as it is.
One of the longest standing of these projects has been the short .30 caliber for the AR platform. Since the first time a U.S. soldier fought against the AK-47 and its 7.62×39mm cartridge, the industry has tried to make that round (or one like it) work in an AR. It is a project that continues to this day, resulting in cartridges like the 300 AAC Blackout, .300 Whisper and a few others. They are all an attempt to approximate the ballistics of the 7.62×39mm and function properly in an AR-type rifle. For most, that is as close to 2,400 feet per second (fps) as you can get with a 125-grain bullet. New powders, bullets and precise manufacturing have made this better with each passing year. But getting these cartridges to fire has never really been the issue—it has been getting them to work in magazines.
The Wilson Combat Whisper762 suppressor does little to affect the balance of the SBR Tactical—it’s lightweight, quiet, and reliable. During range tests, the suppressor showed no signs of shifting the point of impact. It provided minimal backpressure, never came loose, and maintained excellent sound suppression.
Take a close look at an AK-47 magazine. It curves almost immediately. Other than the lip of the magazine, about an inch or so, it is one continuous curve. This is necessary for the ammunition to feed properly past about ten rounds, given the cartridge diameter. You could make a straight magazine, of course, but it would be too long to be practical, and still presents its own set of issues. You need the curve in order to make it practical with a 30-round magazine—even for a 20- or 25-rounder. Without this curve, the rounds will bunch up in the middle and cause malfunctions. It is just one of those laws of physics that cannot be circumvented.
Wilson builds their SBR with their TTU (Tactical Trigger Unit), which provides operators with a clean two-stage trigger.
BLOG ARCHIVES
Posted by echigoyaworks
at 16:00
2012年07月17日
Sionics Weapon Systems SAR -15-QR10
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
Designed by operators for operators with all the features that patrol officers need!
The Sionics SAR-15-QR10 offers true no-nonsense Mil-Spec quality at the right price for today’s law enforcement needs. It is shown equipped with an EOTech 553.A65TAN HWS and Atlas Precision BT10 bipod.
Sionics Weapon Systems is a fairly new AR rifle manufacturer that is committed to delivering the highest quality Mil-Spec no-nonsense guns at the lowest possible price. And judging by its SAR-15-QR10 rifle, I would say they have succeeded.
Sionics SAR-15-QR10 exhibited tight tolerances between the upper and lower receivers and an excellent finish.
The staff and management at Sionics is made up of former military and law enforcement personnel who know what it means to depend on your weapon system. Josh Ellis, the owner of Sionics, has worked closely with many police armorers to ensure that his rifle meets their needs. It has been extensively tested and approved by the Tucson Police Department as a patrol rifle. According to Ellis, Sionics rifles are being used by federal agents as well as being currently evaluated by several law enforcement agencies.
The SAR-15-QR10 sports an olive drab Magpul ACS carbine stock, MIAD pistol grip, MOE enlarged triggerguard, XTM rail panels, PMag and MBUS flip-up front and rear sights.
The SAR-15 is a direct gas impingement 5.56mm NATO semi-auto rifle exhibiting above standard quality. The fit and finish and attention to detail are equivalent to what one would expect from a custom gun shop and with some extras as well.
BLOG ARCHIVES
Designed by operators for operators with all the features that patrol officers need!
The Sionics SAR-15-QR10 offers true no-nonsense Mil-Spec quality at the right price for today’s law enforcement needs. It is shown equipped with an EOTech 553.A65TAN HWS and Atlas Precision BT10 bipod.
Sionics Weapon Systems is a fairly new AR rifle manufacturer that is committed to delivering the highest quality Mil-Spec no-nonsense guns at the lowest possible price. And judging by its SAR-15-QR10 rifle, I would say they have succeeded.
Sionics SAR-15-QR10 exhibited tight tolerances between the upper and lower receivers and an excellent finish.
The staff and management at Sionics is made up of former military and law enforcement personnel who know what it means to depend on your weapon system. Josh Ellis, the owner of Sionics, has worked closely with many police armorers to ensure that his rifle meets their needs. It has been extensively tested and approved by the Tucson Police Department as a patrol rifle. According to Ellis, Sionics rifles are being used by federal agents as well as being currently evaluated by several law enforcement agencies.
The SAR-15-QR10 sports an olive drab Magpul ACS carbine stock, MIAD pistol grip, MOE enlarged triggerguard, XTM rail panels, PMag and MBUS flip-up front and rear sights.
The SAR-15 is a direct gas impingement 5.56mm NATO semi-auto rifle exhibiting above standard quality. The fit and finish and attention to detail are equivalent to what one would expect from a custom gun shop and with some extras as well.
BLOG ARCHIVES
Posted by echigoyaworks
at 10:00
