Engineering & Technical Division

上記の広告は1ヶ月以上記事の更新がないブログに表示されます。
新しい記事を書くことで、こちらの広告の表示を消すことができます。  

いつも当ブログをご覧頂きありがとうございます!



Beta Project presented MAGPUL PTS Type magazine of WA M4 Series Airsoft Gas Rifle
Polymer Construction
Fit for Western Arms M4 Series Gas Blow Black GBB Rifle
30 Rounds of Loading Capacity
Texture Surface good for gripping & loading in game
Removable floor plate to replace MAGPUL PMAG Ranger
Include MAGPUL Floor Plate & able to attach PMAG Ranger (Sold Separately)
Suitable for 6mm Plastic Bullet only




Available in Dark Earth and Black





NEWS ARCHIVES

  

いつも当ブログをご覧頂きありがとうございます!
REPOST


Black Hawk Down fans out there. Here is a simple DIY guide on how to convert your Tokyo Marui Sopmod/CQB-R to M16A3

Note: During the conversion you will need some tools and basic machining skills, if you don't have a lathe and milling machine a dremmel tool and alike will also do the job.

Base gun-Tokyo Marui Next Generation M4A1 CQB-R.


Step 1: Remove the butt stock, remove buffer tube out from the frame.


*It looks like this when all the small bits,wire and tube cap are removed.


Step 2: Remove this part. (see image to follow)


*It looks like this after machining.


Step 3: Reduce buffer tube thread from 19mm+- to 12mm+-



*It should look like this after machining.


Step 4: Grab any AEG m16 fixed butt stock and remove all the screw and butt plate


Step 5: Use A chisel to remove this tube pipe stopper (see image to follow)



*Stopper is removed out from the shell


Step 6: Use a dremel to remove these parts ( with red marks)


*It looks like this after removing.


Step 7: Insert the buffer tube to the stock, use a dremel to make a 3.30mm gap/space this is where the steel ring going to sit in. (see image to follow, do it carefully)


Step 8: Remove these two sides. Do not remove the center part this will lock on the lower frame. It should be snug fit to the lower frame. do it carefuly (see image to follow)


*It looks like this after removing the two sides.


Step 9: Cut this steel plate, use a milling machine or metal grinder (see image to follow)


*it should look like this after


* This time you will need to replace the Tokyo Marui tube cap to ARS
CNC hard metal tube cap.This tube cap has a 5mm thread and you need a 5mm x 100mm long lock screw.


Step 10: Reinstall the buffer tube,steel ring , recoil unit, recoil spring, ARS tube cap,wire, mosfet, butt plate and lastly lock it with the long screw.


*It looks like this after





Step 11: For m16 front assembly, change the TM stock 10.5 inches outer barrel to Echigoya CNC one piece hard Steel 20 inches outer barrel



Put everything back and you're Done!!! M16A3 Black Hawk Down look alike!




All parts used are available here!

NEWS ARCHIVES


  

いつも当ブログをご覧頂きありがとうございます!



Metal Receiver for Next Generation M4 Recoil Shock Series


A few years back, the airsoft industry was flooded with new innovations from Hongkong, China and Taiwan markets., thereby making the famed Tokyo Marui unpopular. But before the end of 2008, Tokyo Marui announced the first of the Next Generation Shoot and Recoil series, the SOPMOD,
manufactured with full metal body and a chrono of over 90m/s.

Tokyo Marui got the upper hand for and since then, manufacturers started to get into the bandwagon and they came out with their own products. And this next generation series became popularly known as EBBs (electric blowback).

Even with the full metal receivers of Tokyo Marui next generation series, airsoft enthusiast are still wanting for more. Now Echigoya has come with the a new aluminum full metal receiver and stock pipe for the next generation M4 series.

It is carved by a machine (CNC) on a full metal block of aluminum.

More Information here:


NEWS ARCHIVES

  

This helmet was designed for professionals who expect the most from their equipment. Just like fine-tuning the suspension on a racecar or sighting in a fire-arm, this helmet must be set up properly before use to function correctly. if you do not follow these instructions, your helmet will suck.

Base Jump helmet is the same design as the Ballistic and Carbon FAST helmets but with a polycarbonate shell and molded front NVG mount
Great for training, search and rescue, climbing, and other outdoor activities. It offers all the benefits and features of FAST helmets at a lower cost, comparable to other recreational sport helmets



Ops-Core Base Jump Helmet Military Model (Multicam, M/L)
- Integrated military style Head-Loc chinstrap
- Lightweight, multi-impact, ventilated liner with repositionable EPP impact pads and LDV closed-cell comfort foam that is not affected by temperature, altitude, or moisture
- 1/2" and 3/4" EPP pads come with the helmet
- Occ-Dial adjustable fitband with replaceable leather front, nape, and side pads quickly detaches to allow convenient donning and doffing of COMMs headsets with internal top headbands
- FAST-ARCs - 4 Position Accessory Rail Connectors: non-snag attachment points for quick yet secure donning or doffing of headborne accessories, including lights, cameras, goggles, COMMs, mandibles, etc
- Molded-in front mount to attach lights, cameras and NVG brackets
- Bungees for NVG stability
- Side Velcro loop for patches and illuminators
- Includes a Picatinny Adapter and Wing-Loc Adapter for the side rail and Universal Adapter for the front mount
- Please specify if you need a Left Eye Dominant chinstrap buckle

Head Circumference (mm):560mm-590mm

Head Size (US): up to 7 3/8

Now Available in Black, Tan and Desert Marpat





Check it Here

NEWS ARCHIVES