スポンサーサイト


上記の広告は1ヶ月以上記事の更新がないブログに表示されます。
新しい記事を書くことで、こちらの広告の表示を消すことができます。  

Posted by ミリタリーブログ  at 

2011年11月14日

M16A4 M203 Recoil Shock Series




Magazine: 82 Rounds
Barrel Length: 20 inches outer barrel
Weight: 5370g
Battery: Not Included

Features:
- Realistic Shoot & Recoil system
- CNC one piece hard Steel 20 inches outer barrel
- G&P Granade Launcher
- Metal Body.
- Auto Stop system.
- Functional bolt stop.







Available here for $1190


  

Posted by echigoyaworks  at 20:00Rifles

2011年11月14日

Magpul PRS Battery Modification



This guide is how to fit a battery inside the Magpul PRS Buttstock

In order to do this you must have the proper equipment, and we advise that you do this at your own risk. Also make sure that your receiver is strong enough to take load of the stock and hard enough take threading tools. I strongly won’t recommend using Tokyo Marui receivers, their metal is only diecast and it is not rigid enough to handle and keep the buttstock in place.




1. Cut the upper receiver’s pipe for the stock pipe about 1inch or 1.5 inch (3 cm.). Use sandpaper or dremmel to dull the sharp edges.




2. Then cut the stock pipe leaving only about 2 inches (5-6 cm.). Again use sandpaper or dremmel the sharp edges.

3. Attach the stock pipe to the receiver using the bolt the same way as you attach it the before (use a nut for attachment if you removed the gearbox).



4. Detach the upper part of the stock by removing the two screws that holds the sling attachment then slide it into the stock pipe. Make sure that you align it properly (x-y). Then mark the spot for the screw, take note of the angle (about 45%). This will connect the stock – to the stock pipe – to the receiver.



5. Then use a metal drill to create a hole, we used a 4mm drill bit. Again take note of the angle, make sure your hole will go through the receiver. Again, I don’t have to remind you that when drilling, make sure that your receiver is stable and it won’t move.



6. Then use a 4mm “threader bit” also known as “top” to create the thread in the hole you made. (Again, stability is very important, you do not want misaligned threads.) In removing the threader, don't use your power tools, unscrew it manually and carefully, avoiding to do damage on the threads.



7. We use socket screw types on both sides. You can also use other types of screws, depends on your preference.



8. This is how it should look like when you are done. All you have to do is reassemble and slide the rest of the Magpul PRS stock back in place.



In the photo above, I was able to create a space with room enough for a lipoly battery together with a burst control mosfet. This is for my 3-round burst sniper rifle.





  

Posted by echigoyaworks  at 15:00DIYs

2011年11月14日

LCT AK47 Full Metal




Full metal machined AK47 which is a far cry from Tokyo Marui version.
Wood, like a real gun, it has inspired a single material processing, and AKM is a different color is breathtaking. The standard grip is the time-like AK 47, Wood Grip (with checker ring). Bolt (cover) as well as real guns, to reproduce the type of bullion.






In the AK series currently in circulation in the real texture and overall I think it is top class. Compared with similar products, there is a difference in the wood into products and processing methods and fine precision parts.

Preorder available here for $840



  

Posted by echigoyaworks  at 11:00Rifles