2011年12月10日
Umarex H&K G36KV Electric Blow Back
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
Full Scale High Power Assembled Electric Powered Airsoft AEG
Official H&K (HECKLER & KOCH) Licensed Authentic Marking on Body
Unique Serial Number on Body matching with package box
New Bolt Blow Back System
Charging Handle can be locked & released (open to adjust Hop-Up)
Synthetic Fiber Body
Rapid blowback bolt give a new sense of realism to the G36 airsoft assault rifle with a strong recoil action
Built-In 3.5x Aiming Scope at the Carry Handle
Realistic Gas Block, Piston & Barrel Locking System
One-Piece Outer Barrel
14mm Clockwise Barrel Thread
No Tools required for completed assembly / disassembly
Full Metal Gear & Parts
Semi-Transparent Hi-Capacity Magazine accommodate 470 Round 6mm airsoft plastic pellet
Revolutionary magazine design allow two magazine clip together easily
Nylon Fiber Made Handguard
Package Include One Adjustable Folding Stock With Rubber Stock Pad / Cheek Piece and One Spare Folding Stock
Fast & easy battery replacement
Front handguard allow installation up to 8.4V 1700mAh Battery (Mini Type, Mini Plug)
Ambidextrous sling mount locations and fire selector lever that is user friendly to both left and right handed
NEWS ARCHIVES
2011年12月10日
Triple Eight (888) Professional Knives
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
Not much longer than a car key when closed, the diminutive knives from Triple Eight Professional are designed as every day carry tools that will be there when you need them. They feature an innovative chassis and patent pending T8P 'Spinner Action' which Triple Eight refers to them with the oxymoronic-sounding term 'folding fixed blade knives'.
Design Concept and the T8P Spinner Action - The concept of a 'folding fixed blade knife', as explained by Walter Kaihatu from 888 Professional in relation to their knives, came from the desire to offer something that was very small and compact, but very strong laterally (for prying) and had a very tight lockup. The design they came up with features a two-piece handle and blade, rotating around a large axle/pivot. There's a 'top' handle and a 'bottom' handle (the one with the clip). Both are made of 420 stainless steel which was chosen to ensure that the chassis itself is very strong, and that when deployed, the blade and handle work together as a single unit. Each handle has a pin pressed into it, which serves as blade stops on either side, in both the closed and deployed positions.
The 'Spinner Action' features a latching feature at the top portion of the handle near the lanyard loop. A small spring loaded ball bearing in the bottom handle keeps the top handle in place by means of a small detent. To open the knife, the top handle unlatches and rotates, taking the blade with it as the stop pin contacts the blade. It rotates 360°, while the blade locks at 180°. The top handle latches again to the bottom handle, once it has rotated the full 360°. Once latched, the blade is locked in the deployed position without any play or movement whatsoever, and mimics a stout fixed blade knife. The blade cannot move unless the handles are unlatched.
The five models of Triple Eight Professional Knives shown here are available from U.S. Cavalry. The Kirkidashi model which has a damascus steel blade, is not shown here.
NEWS ARCHIVES
Not much longer than a car key when closed, the diminutive knives from Triple Eight Professional are designed as every day carry tools that will be there when you need them. They feature an innovative chassis and patent pending T8P 'Spinner Action' which Triple Eight refers to them with the oxymoronic-sounding term 'folding fixed blade knives'.
Design Concept and the T8P Spinner Action - The concept of a 'folding fixed blade knife', as explained by Walter Kaihatu from 888 Professional in relation to their knives, came from the desire to offer something that was very small and compact, but very strong laterally (for prying) and had a very tight lockup. The design they came up with features a two-piece handle and blade, rotating around a large axle/pivot. There's a 'top' handle and a 'bottom' handle (the one with the clip). Both are made of 420 stainless steel which was chosen to ensure that the chassis itself is very strong, and that when deployed, the blade and handle work together as a single unit. Each handle has a pin pressed into it, which serves as blade stops on either side, in both the closed and deployed positions.
The 'Spinner Action' features a latching feature at the top portion of the handle near the lanyard loop. A small spring loaded ball bearing in the bottom handle keeps the top handle in place by means of a small detent. To open the knife, the top handle unlatches and rotates, taking the blade with it as the stop pin contacts the blade. It rotates 360°, while the blade locks at 180°. The top handle latches again to the bottom handle, once it has rotated the full 360°. Once latched, the blade is locked in the deployed position without any play or movement whatsoever, and mimics a stout fixed blade knife. The blade cannot move unless the handles are unlatched.
The five models of Triple Eight Professional Knives shown here are available from U.S. Cavalry. The Kirkidashi model which has a damascus steel blade, is not shown here.
NEWS ARCHIVES
2011年12月10日
C4OPS from Silynx
私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。
I found a website that is coming with a new set of communication devices, for land, air and sea.
http://www.silynxcom.com/
Their website lets you build your own communication device, with a nice oakley glove for a pointer.
NEWS ARCHIVES
