Engineering & Technical Division

私たちのブログを訪問していただきありがとうございます。あなたがお持ちの場合DIYの要求は私達に電子メールを送信してください。

The following photos are step by step disassembly of the Tokyo Marui P90. By far this is the easiest AEG to takedown, it only to remove two screws and everything is disassembled, excluding the gearbox of course which involves another part of an AEG disassembly.


The disassemble P90



The P90



Of course, first remove the magazine



Push this button inwards and then slide the front assembly out as shown below



Slide in this direction



Turn the inner barrel assembly clockwise until the small nub fits into the slot...



...this nub, then slide the assembly out.



Now to take the gearbox out, Remove the stock plate by pushing and sliding as shown in the photo above



Now remove these two screws that hold the retaining plate



Slide out the retaining plate



After removing the retaining plate, the gearbox should slide out easily. If there is a little bit of resistance try to wriggle it out gently



And now you have fully disassembly a P90. This should also be the same with all P90 AEGs out there, most of them are vlones of Tokyo Marui.


BLOG ARCHIVES